Bosko Water Technologies Ltd. primary focus is directed at the industrial areas of agriculture waste, marine and heavy industry use. We offer very innovative, leading edge patented green, clean technology solutions to the need for pure, safe h20!
Our solutions reside in our patented technology that can be used anywhere that quality, safe water is required. It is a fully automated, self cleansing, self monitoring, low energy water purification and water re`clamation and re`purposing system that is designed to handle almost all ranges of water quality.
Our field trial systems used biologically and chemically contaminated feed water as the source liquid. Dual pass systems created Reagent Grade “1” quality water from animal raw sewage and experienced very low maintenance issues. The fully automatic system has pushed the envelope in water purification design and is targeted at the industrial industry (environmental), global food service Industry as well as whole house residential units.
With our primary focus on industry, the application of our systems to both the industrial and institutional environments will be initially developed on a design-build basis. However, we do have an industrial system that is housed as a self-contained mobile unit capable of possessing up to one million gallons per day (GPD). Visit our Products Page.
Our patented systems are ideally suited to emergency and disaster relief applications as well as industrial waste and agricultural lagoon reclamation. Mobile systems can also be converted to permanent systems that can be incorporated into new waste water management systems or to replace existing treatment systems. Our self-enclosed systems are ideally suited for quick installation in a variety of environmental conditions while featuring our patented self-cleaning, low maintenance capabilities.
Our Re`new™ Water Purification Systems capacity series, use no chemicals or additives to operate and is totally scalable from one gallon per hour to 300,000 gallons per day (GPD) 208 US Gallons per minute (GPM) (780 L/m). Now this is pure green innovation!
How it Works
Stage One
Water enters the first stage of the system under city pressure 40-100 PSI and it is filtered by a 1 micron sediment cartridge that can be self cleansed using our recent patented technology, if needed according to the feed water quality.
This first stage is designed to capture suspended particles larger than one micron (one micron being one millionth of a meter).
Stage Two
The second stage of the system uses a 1-5 micron rated extruded carbon block cartridge that is primarily designed to remove and or absorb unwanted gases and contaminates including the 106 EPA priority pollutants. e.g. PCB, TCE, THM, and many others including Lethal Radon Gas.
Stage Three
The filtered water enters the third stage of the system that uses a thin film polyamide (PA) semi-permeable membrane and cross flow separation, where water molecules are forced out of solution and cross the membrane barrier, leaving the dissolved solids behind and concentrated, Sodium Chloride, (NaCl) , Calcium Carbonate(CaCO3) and other metal salts are the most common along with Silicon Dioxide (SiO2).
The water now divides into two streams:
1. The permeate (purified water) to storage.
2. The concentrate (Waste Water to drain or back to source.)
Our patented method and apparatus allows the purified water stream (1) to enter a freely expandable, freely collapsible one-way vented bag placed above the membrane module.
This placement of purified water storage reservoir allows gravity reverse flow across the membrane wall which is controlled by a patented High Low - Level Control (HL-LC) Circuit.
This cause and effect event brings several features and benefits to the operation and life of the systems. Visit our Product Overview Page for further specifications.